go to your ini folder . then to the weap.txt now copy and past this line over the orignal one..note this is not as accurate as the revolver but still does damage..
//-------------------------------------------------------------------------------------
// m1911
//-------------------------------------------------------------------------------------
`w_new 7 2205 7949
`w_animgroup B
`w_slot 2
`w_model VvH_M1911_A1
`w_use 1 0 30
`w_magazine 0 4 8 4.90
`w_ext 0.07 15 0.85
`w_aimswing 0.25 1.91 0.13 2.1 0.08 2.3
`w_hud 1 45 45 1
`w_tracer 1 255 255 136 1
`w_reload_signal 10 0.5
//--------------------------
`w_b_new 1 2750
`w_b_heardist 310 1 1
`w_b_repeat 8.93 0
`w_b_magazine 0 1
`w_b_ai_use 0 0 0.5 0.4 0.5 1
`w_b_ai_use -1 -1 0.5 0.2 0.0 1
`w_b_ai_use 0 10 0.6 0.1 0.0 1
`w_b_ai_use 10 20 0.8 0.1 0.5 1
`w_b_ai_use 20 30 0.2 0.2 0.0 1
`w_b_ai_use 30 40 0.3 0.2 0.5 1
`w_b_ai_use 40 50 0.5 0.1 0.4 1
`w_b_ai_use 50 60 0.6 0.1 0.3 1
`w_b_ai_use 60 70 0.9 0.2 0.3 1
`w_b_ai_use 70 80 0.5 0.2 0.3 1
`w_b_ai_use 80 100 0.7 0.2 0.3 1
`w_b_ai_use 100 120 0.9 0.2 0.2 1
`w_b_ai_use 100 150 0.5 0.1 0.2 1
`w_b_ai_use 150 500 0.5 0.2 0.2 1
`w_b_accur_run 3 12
`w_b_accur_walk 2.5 9
`w_b_accur_stand 1.8 7 1 5
`w_b_accur_crouch 1.5 6 1 5
`w_b_accur_lie 1 6 1 4
`w_b_accur_aimmove 2 6
`w_b_accur_aimstand 0.10 2.1 1 4
`w_b_accur_aimcrouch 0.05 1.3 1 3
`w_b_accur_aimlie 0.03 0.9 1 3
`w_b_accur_firechng 3
`w_b_accur_timechng 5
`w_b_shot 0 4 0 1 0.1
`w_b_shot_force_move 0.4 -1.53 1 0.1 -0.33 0.1
`w_b_shot_force_stand 0.3 -1.11 1 0.1 -0.23 0.1
`w_b_shot_force_crouch 0.2 -0.75 1 0.1 -0.18 0.1
`w_b_shot_force_lie 0.1 -0.10 1 0.0 -0.15 0.1
`w_b_shot_snd 25
`w_b_shot_snd_rev 361
`w_b_shot_light 255 240 200 3.0 0.1 0 0 0.1 0.05 0.2 0.0