1) Control Panel > System > Hardware tab > Device Manager
2) Double click on your network card
3) Advanced tab
4) Look for
network address or something similar
5) Enter a new MAC addy in the
value box
DONE!
How to check if it worked
1) Bring up the DOS prompt
2) Type
ipconfig /all3) Read the line called Physical Address
If the physical address is = to the new MAC you put in then it's worked.
NOTE: Some ISP's only allow one MAC addy per home connection to use the internet.
If you cant connect to the net after changing your MAC then your screwed.
You'll have to set the network card back to
Not Present.