Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - jazznas

Pages: 1 ... 26 27 28 29 30 [31]
Vietcong 1 & 2 / Skin Hacking
« on: January 05, 2004, 12:35:04 am »
as i already wrote in the old forums, that doesnt work.
it only swaps the skins on your pc, nobody else can see it.

Demos / how to extract the demo
« on: January 04, 2004, 02:04:34 pm »
All credits for this goes to tintin, who has been kind enough to write everything down:

This is for informational purposes only. It is up to the user to decide if it is moral/legal to use this information,I take no resposibility in any way how you use this information, or if you screw up your system trying to follow it.

Well everyone has tried to find a program that would extract the cbf files. There were a few programs that did most of the job, but did not extract the important config files. After much searching and even writing a program that could extract most the files, it dawned on me. Pterodon was nice enough to package a cbf extractor for us. It just needed a bit of tweaking to do what is wanted.

If you notice when Pterodon puts out its games, like its demo it packages them as an installer + a cbf file. If you pay attention the cbf file called disk01.cbf contains the game executable, the dlls, and at least one other cbf file. All the setup.exe does is extract files from disk01.cbf and adds some reg entries.

For example when we run setup on the demo it creates the demo dir extracts the game dlls from disk01.cbf, extracts the vietcong.exe and also another build###.cbf that contains all the game info. When you later patch the game it replaces some dlls and the exe and adds some more cbf files in the game dir.

What people have wanted to do is to extract cbf files OTHER than the disk0#.cbf. Through studying how setup.exe works you can adapt it to extract ANY cbf file.

With a hex editor open the setup.exe in the demo. Keep searching for the work disk. EVentually you will see were it says disk....cbf

Right before this you will see 2 sets of %s%02d . What needs to be done is the first %s%02d needs to be replaced with nulls. That is replace each of those characters with hex 00. This will allow the setup program to extract every file from a cbf. The cbf has to still be renamed to disk01.cbf.

To extract any cbf, copy it to a blank drive in the root folder. copy your modified setup.exe and the original setup.cbf to the blank drive too. Now go to you windows temp dir and empty it of everything! This is important as the setup program will try and copy anything from the temp dir. One trick is to make a text file with some odd name and put it in the temp dir. This is because when you see the setup program copy this file, then you know it is time to kill the setup program.

Before you attempt this remember this will extract the files into the vietcong game directory. You may want to move your demo installation somewhere else. Also rename the reg keys. The install (setup.exe) program may ask you to uninstall the old install, let it do that all it does is remove anything in the vietcong default install folder (if you rename it, it does nothgin) and remove the regkey. Now with the newly moded setup.exe, setup.cbf and the build#.cbf file that was renamed to disk01.cbf that you moved to a empty drive start the install. Dont choose to install icons or gamespy! Just let the program run, it will list all the files being extracted, When you see it trying to copy that one file that you made and placed in the windows temp dir use the task manager to kill the setup exe. Do not press cancel as cancel will delete any extracted files.

Demos / skinhack/godmode tutorial
« on: January 04, 2004, 10:29:31 am »
skinhacking is very esay to do in the demo
you can do 2 things with skinhacking
1. you can swap te us with the vc skin works better on servers where friendly fire is off ;)
2. you can put diff things on your head like choppers trees etc

first you have to open regedit
(for the noobs out there:
start>run> type: regedit and press ok)

now go to: hkey_local_machine> software > pterodon > vietcong >multiplayer
then choose us or vc
youll see in the right window fillowing:
- (standart)
- body BES
- cap BES
- cap EQP

body bes is the line for your skin in this line you also can active the "godmode"/vest - vest because you arent absoluteley invinsible...
a normal skin has 190 hp i but with the "vest" got 10.000...
for godmode change the line to:

cap BES if for your hat and cap EQP for the postion of that hat

all this exept godmode/vest (real godmode is only possible on server site so if you are the server, you also have to extract the game to do it
check the advanced cheating section to learn how to extract the game)also works in the retail version up to v1.3 but it needs to be done in the memory...

here you can download a list of the most skins:[DEMO].zip

General Modding & Programming / Other Games / gta vice city cars
« on: January 04, 2004, 09:36:17 am »
LTC put all this in one single post theres no needing to make a new post for each pic...
if you want to spam do it at the r.i.b, not here

Operation Flashpoint / unl. ammo player id change etc trainer
« on: January 04, 2004, 05:59:39 am »
NoObS 1.91 Trainer, educational purposes ONLY, use at own server.

This one is for Operation Flashpoint:
-Unlimited Ammo

-Change Player ID.
Bypass Bans
Impersonate Admins, Players, Clanleaders
Server Control will be possible

Version 1.91

Version 1.92b
First TKC trainer for any other game than VC.

Version 1.94b

First few trainers for the planned TKC expansion.

not all of this cheats work, some are for sp and some doesnt even exist...

posted by Voodoo:


god - God mode
undying - Dead mode
noclip - No clipping mode
notarget - Enemies ignore you
give all - All weapons and health/armor at max
give health - Health at 100%
give armor - Armor at 100%
give ammo - Ammo at 100%
give inventory - Maximum inventory
give <item name> - Spawn indicated item
npc kill all - Kill all non-player characters
npc spawn <npc name> - Spawn indicated NPC (see the list below)
npc spawn vehicle <vehicle name> - Spawn indicated NPC vehicle (see the list below)
d_npc freeze 1 - Freeze all NPCs (place 0 instead of 1 to unfreeze them)
sabercolor <1-2> <color 1> <color 2> - Set saber color
setsaberall <1-10> - Set all lightsaber abilities
setsaberthrow <1-3> - Set lightsaber throw level
setsaberoffense <1-3> - Set lightsaber offense level
setsaberdefense <1-3> - Set lightsaber defense level
setforceall <1-4> - Set all forces to indicated value
setforcejump <1-3> - Set Force Jump level
setforceheal <1-3> - Set Force Heal level
setforcepush <1-3> - Set Force Push level
setforcepull <1-3> - Set Force Pull level
setforcespeed <1-3> - Set Force Speed level
setforcegrip <1-3> - Set Force Grip level
setforcelightning <1-3> - Set Force Lightning level
saber single_<1-9> - Single lightsaber with desired hilt
saber single_<1-9> single_<1-9> - Dual lightsabers with desired hilt
saber dual_<1-5> - Double lightsaber with desired hilt
saber sith_sword - Sith sword
g_spskill <number> - Change difficulty level after quicksave/quickload or starting a new mission
shaderlist - Show shaders
force_heal - Use Force Heal
thereisnosthingy - Bullet time
timescale <number> - Change speed (1 is default, .5 is half speed)
g_saberrealisticcombat <1-20> - Enable dismemberment
g_dismemberment 100
playermodel <model name> - Play as indicated model
fly_xwing - Fly an X-Wing
drive_atst - Ride an ATST
devmap <map name> - Load map with cheats enabled
map pit - Pit level
victory - Level skip
record <filename> - Record a demo with indicated name
stoprecord - Stop demo recording
demo <filename> - Play a recorded demo
g_saberrealisticcombat <1-20> - Enable dismemberment (turn it on at the options menu after enabling this code)
freeze <#> - Freeze game for # seconds
taunt - Perform a taunt
echo <text> - Display indicated message in the console (or on main screen if bound)
toggle <variable> - Toggle any variable/command that uses a 1 or 0
levelshot - Turn off HUD and save screenshot
screenshot - Save screenshot
centerview - Centers the view on the screen
kill - Suicide
quit - Quit game
where - ?
spawn - ?
altbind - ?
altbindlist - ?
systeminfo - ?
gfxinfo - ?
playsong - ?
widgetcom - ?
inventory - ?
vstr - ?
heartbeat - ?
kick - ?
tiki - ?
rcon - ?
flushlips - ?
meminfo - ?
reset - ?
alisdump - ?
skinlist - ?
mand - ?

NPCs List
Use one of the following entries with the npc spawn code. NOTE: Some models may not work as they are not finished and/or used in this version of the game or on certain maps. Also be aware that there are also variations of some character models using modifiers such as cultist_saber "_strong", "_throw", etc.
assassin_droid, bartender, bespincop, bespincop2, cultist, cultist_destroyer (this character will suck in all surrounding force energy and self-destruct), cultist_drain, cultist_grip, cultist_lightning , cultist_saber, cultist_saber2, cultist_saber_throw2, cultist_saber_med2, cultist_saber_med_throw2, cultist_saber_stong2, cultist_saber_strong_throw2, cultist_saber_all2, cultist_saber_all_throw2, cultistcommando, elder, elder2, galak_mech, glider, gonk, gran, gran2, granboxer, granshooter, hazardtrooper, hazardtrooperconcussion, hazardtrooperofficer, human_merc_bow, human_merc, human_merc_rep, human_merc_flc, human_merc_cnc, human_merc, human_merc_key, impcommander, imperial, impofficer, impworker, interrogator, jawa, jawa_armed (will cause an error; no jawa gun), jedi, jedif, jedi2, jedimaster, jeditrainer, jedi_random (will spawn one of the following jedi_ models), jedi_hf1, jedi_hf2, jedi_hm1, jedi_hm2, jedi_kdm1, jedi_kdm2, jedi_rm1, jedi_rm2, jedi_tf1, jedi_tf2, jedi_zf1, jedi_zf2, mark1, mark2, merchant, minemonster, mouse, nulldriver, player, prisoner, prisoner2, probe, protocol (C3PO), protocol_imp, r2d2, r2d2_imp, r5d2_npc, r5d2_imp, rebel, rebel2, reborn, rebornacrobat, rebornboss, rebornchiss, rebornfencer, rebornforceuser, rebornrodian, reborntrandoshan, rebornweequay, reborn_dual, reborn_dual2, reborn_new, reborn_new2, reborn_staff, reborn_staff2, DKothos, VKothos, RebornMaster, RebornMasterDual, RebornMasterStaff, remote, rockettrooper, rockettrooper2, RocketTrooper2Officer, RocketTrooper_ver1, rocks, rodian, Rodian2, saber_droid, saber_droid_training, saboteur, saboteurcommando, saboteurpistol, saboteursniper, sand_creature, sand_creature_fast, seeker, sentry, snowtrooper, stcommander, stofficer, stofficeralt, stormpilot, stormtrooper, StormTrooper2, swamptrooper, SwampTrooper2, Tavion, tavion_new, Tavion_scepter, Tavion_sith_sword, test, trandoshan (different colors possible), tusken, tuskensniper, ugnaught, Ugnaught2, weequay, Weequay2, Weequay3, Weequay4 (different colors possible), ragnos, luke , kyle, kyle_boss, rosh_penin, rosh_penin_noforce, rosh_dark, rosh, rancor , rancor_mutant, wampa , jedi_random , howler, shadowtrooper , ShadowTrooper2, stormtrooper, alora , alora_dual , jan, lando, boba_fett , chewie, desann , galak, lannik_racto, rax, noghri, reelo, monmothma, morgankatarn, prisoner, rebel

You can use any npc spawn name with the playermodel code to turn into any specific NPC. However, using any non-humanoid models such as robots may crash the game sometimes.

Vehicle names
Use one of the following entries with the npc spawn vehicle code:

swoop, atst_vehicle, lambdashuttle, rancor_vehicle, swoop, swoop_cin, swoop_mp, swoop_mp2, swoop_red, tauntaun, template, tie-bomber, tie-bomber2, wampa_vehicle, wildtauntaun, x-wing, yt-1300, z-95


Changing saber colors
When using the sabercolor <1-2> <color 1> <color 2> code, the following values can be used for <color 1> and <color 2>.
green, red, blue, yellow, purple, orange

sabercolor 1 will make the right-hand saber (for dual sabers) <color 1>. sabercolor 2 will make the left hand saber (for dual sabers) <color 1>. sabercolor 1 <color 1> <color 2> will make the top part of the saber staff <color 1> and the bottom part <color 2>. For example, to have a saber staff (two handed saber) green, use the sabercolor 1 green green code.

Difficulty settings
Use one of the following entries with the g_spskill <number> code:

0 - Padawan
1 - Jedi
2 - Jedi Knight
3 - Jedi Master
Values higher than 3 will progressively increase the difficulty setting.

Haunting glitch
When you are about to get eaten by a Rancor, use level 3 Force Protection power. Note: You must have full health. You will be inside the Rancor. Kill it to get free. At first, it appears as if you are in spectator mode, but you are not. You and no one else can see your character, even if they have level 3 Sense. You can still attack people and ride vehicles.

Access all saber types at any stage in the game
In the early stages of the game you only have the choice of one single saber. If you want to use the dual sabers or saber staff do the following:

1. Go to the "GameData\Base" folder
2. Open "jaconfig.cfg" in wordpad (wordpad sorts out the encoding making it easier to read)
3. Go to the line which starts ' seta g_saber_type "single" '
4. Replace that line and the next 4 lines with the following:

If you want 1 single saber:

seta g_saber_type single
seta g_saber single_1-7 // change this color to what ever you want e.g. blue, green

If you want 2 single sabers:

seta g_saber_dual 2 // 2 Red Sabers
seta g_saber single_1-7 single_1-7 // change this color to what ever you want e.g. blue, green

If you want the dual bladed saber staff (think Darth Maul):

seta g_saber dual_1-7 // change this color to what ever you want e.g. blue, green,

5. From the main menu press [Shift]+[~] to access the console.
6. Type: map yavin1b (See the note at the bottom)
7. And your off...

NOTE: Do not start a new game otherwise the file is overwritten. This is the first level that you actually play and this skips the overwrite when you select the saber. If you have not chosen your character settings yet do this first, start the game and then exit. Perform the actions above and when you start your player settings will be there, enjoy! There is obviously a setting to change the saber hilts however I cannot find it. If someone has or does find it please tell me! Matthew Kingshott (Kingers)


Key binding
Open up the console by pressing [Shift]+[~] and type bind <key> <code or effect>. For example, type bind Home setforceall 4 or bind T taunt. Note: Do not bind over existing keys that you are using for regular game play movement or fighting. If you do, go back into your game options and reset them.

Fighting friendly characters
Enable the playerteam enemy code in the console, then spawn kyle or jedi_random to fight them.

Defeating Reborns
Activate Force Speed (works best with grade 3 speed) and slash once at their front to lure them down. Then, run around behind them and slash their back as many times as possible. This works best if you push them in a corner and complete the procedure.

And here is the Bloodpatch copy this to gamedate/base to enabel cheats for Dismemberment.

to active cheats on a server write in the console:

/devmap *map (if you are the server)
/rcon devmap *map (if the server is somewhere else)

the new official bonus maps:


this should also work on a server which is running the "jka + mod"
with this mod admins can spawn vehicles and npcs without that cheats are activated
all you have to do is getting an admin to spawn you a rancor :grandpa

by [TKC]Punk.bLaN*

Here is a cheat on how to get completly invisible...this cheat was listed on a site but didn't work although I found a way to make it work. This might have been posted where on a cheat server spawn a rancor then while he grabs you put on protection and once he eats you kill him from the inside...HOWEVER this will NOT work protection won't help any and you will die. BUT here is how you do make it work. Spawn a rancor, then challenge someone to a duel and when they accept go get eaten because the rancor can't hurt you while dueling, then tell the person to break the duel off(by walking away) and kill the rancor from the inside, once it's dead you can walk around freely and you are invisible to everyone but you can still get hurt so use god mode or just be careful

General Modding & Programming / Other Games / Windows game cheats :D
« on: January 04, 2004, 05:27:05 am »
by laxative:

These are really working.

1. Minesweeper

Start it (of course)
the write xyzzy and press shift+enter at the same time
then adjust your screen so that EVERY pixel is watchable, move your cursor over a block in the game and watch the upper left pixel of the whole screen. White= clear Black= Mine

2. Freecell
Press ctrl+shift+F10 and then just read the lines there

by laxative:

Go to and download the trial version and you are able to slow down or speed up your game as much as you like... you can also set keys to slow/speed up your game...
PS add this to the download section...
I can give the reg key for anyone who wants it from the private... sorry i cant write/speak english so well

The m3-clan

General Modding & Programming / Other Games / modding cars
« on: January 04, 2004, 05:12:00 am »
nah this is my sction ill move that stuff :nono

Off Topic / finaly 3th member who registerd
« on: January 04, 2004, 05:11:13 am »
double post :nono

Pages: 1 ... 26 27 28 29 30 [31]